Lorem ipsum dolor sit amet, consectetur adipiscing elit. Integer convallis accumsan mi nec elementum. Nulla ante metus, varius non condimentum id, molestie nec tellus. Fusce odio nulla, consectetur in sagittis eget, vulputate at lacus. Vivamus nulla massa, dictum quis purus
How To Become A Partner
ULTRA is a revolutionary new energy management equipment that uses Magnetic Wave Energy to realign electron spin. This results in a more efficient current flow that minimizes energy loss.
The specific saving rate depends on the actual operating environment and the operating mechanism of the load.
Below Is the average saving rate based on the statistics of various field reports:
• On Resistive Load
– Possible Energy Saving Rate is less than 3%.
– Up to 5% increase of illumination intensity.
• On Inductive Load
– Minimum Saving Rate is 11%.
• On Complex Load : Mixture of R+L
– Minimum 8% (where Inductive load takes more than 60% out of whole load system)
Since ULTRA uses a patented technology that does not rely on any form of electronics or mechanical parts, the average lifespan is more than 10 years if ULTRA is being used in recommended conditions. Please refer to our website for detailed information.
ULTRA is the world’s first patented energy management equipment that does not use Power Factor Compensation (PFC) or Voltage Regulation to save energy. ULTRA offers a new chemically-based system that makes your current electrical system more efficient.
ULTRA does not drop the voltage of your current system, nor does it take up a large amount of space or consume energy to function. In short, there is no other energy saving product that compares to ULTRA on the market.
ULTRA uses parallel installation and is usually installed after the Circuit Breaker. However, dispersed installation for each circuit is also possible. Installation usually takes about 30 minutes per unit.
You can find the most suitable unit by examining the model number of each ULTRA unit. The model number indicates the maximum capacity that the unit can suitably perform.
For example, model number UR-30 can provide the proper energy saving performance at a location that consumes a maximum of 30KVA. This means that the ULTRA unit must have a capacity that is larger than the location or load of installation. If your location consumes a maximum of 70kWh, the proper ULTRA model would be UC-100.
In order to select the proper ULTRA model, you must first determine the Main Transformer Capacity, Contract Capacity, Circuit Breaker Capacity and Actual Maximum consumption. The amount of electricity consumed by your location determines the most suitable ULTRA model.
The best way of checking your energy savings is through regular consumption monitoring. This will give you the most clear and substantial indicator for energy savings. The easiest way to see how much energy you are saving is to look at your electric bill after ULTRA is installed. It is also possible to install a data logger or recording device to tell you specific readings periodically.
If you are comparing your kWh usage with corresponding months from the previous year it is important to factor in any new equipment or changes in operating conditions.
ULTRA does not cause any harmful effect on the installed system. Unlike other energy savings devices that drop voltage, ULTRA does not consume any voltage or current so it will not affect your equipment.
ULTRA does not contain any mechanical parts and does not draw any load, so it does not consume any energy.
ULTRA can be used with any size low voltage load (Single Phase and Three Phase). With 11 model sizes ULTRA can be designed singularly or in groups to suit the subject load. There is no maximum or minimum load.
No, ULTRA does not affect the voltage within the circuit. ULTRA optimizes the environment of electric current supply within the circuit.
No, ULTRA is not a power factor correction device. However, it will marginally improve power factor but as an added benefit.
No, ULTRA will not cause any harmful effect on system components.
